| Products //
Playfield Rotisserie - SOLD OUT |
| |
|
 |
Background information :: |
| |
This unique device allows you to mount a pinball
playfield and rotate it 360° for easy repair, restoration,
or refurbishing. |
| |
|
| |
Playfield flat on the rotisserie (click
on any image for an enlarged view): |
Tilted playfield on the rotisserie : |
| |
 |
 |
| |
|
|
On one end, clamps hold the playfield in place.
The thumb screw is used to lock the tipper into place when rotated
to any angle, though it will lay almost flat without locking. |
| |
|
|
On the other end, the playfield is held in place
with included legs which mount into existing screw holes. |
| |
|
|
| |
End with clamps:: |
Close-up of the screws:: |
| |
 |
 |
| |
|
| |
Rotisserie without playfield:: |
|
| |
 |
|
|
Will also accommodate widebody playfields. |
| |
|
|
| The rotisserie includes the following
pieces:: |
|
Four bars on the bottom to adjust length (with thumbscrews
to lock the length) |
|
Two A-frame pieces (one on each end) |
|
Two rotating pieces to which the playfield mounts |
|
Three short and three long legs, used to attach one end
of the playfield using existing screw holes (you may need
to remove GI lights or similar) |
|
Two C-clamps to grab hold of the playfield resting on
the other end of the bar |
| |
|
|
|
Click here for assembly instructions [coming
soon]. |
| |
|
|
| |
)
)
)
)
){kind=spacer}